LIYI Walk In Climate Test Chamber Temperature Humidity Test Chamber
On Site Installation
Walk-in Climatic Chamber With Temperature Humidity Climatic Testing
Systems On Site Installation is widely used to do accelerated damp
and thermal testing, alternating temperature test and constant
temperature test,etc in aerospace, aviation, electronics,
automobiles, batteries and other industries, and also could do
routine tests at high and low temperatures. Storage at low
temperature to evaluate the performance of the specimen under given
environmental conditions.
Providing virtual space to simulate the real environment, to verify
the product inspection and R & D results for aerospace, aviation,
electronics, automobile, battery and other products and quality
inspection institutes, research institutes, colleges and
universities and other experimental units. the test chamber is to
shorten the development period. An indispensable right-hand man to
improve product quality and reliability.
Standards:
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Specifications:
| Model | LY-280 | LY-2150 | LY-2225 | LY-2408 | LY-2800 | LY-21000 |
| Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 | 100×100×1000 |
| External Size W×H×D(cm) | 93×155×95 | 100×148×106 | 117×166×118 | 122×176×121 | 158×186×148 | 158×195×168 |
| Volume(L) | 80 L | 150L | 225L | 408L | 800L | 1000L |
| Temp&Humi Control Range | Temp. Range: A: -20℃～100℃ humidity range: 20%~98% B: -40℃～150℃ C: -70℃～150℃ (Other temperature and humidity range can be customized) |
| Temp&Humi Fluctuation | ±0.5℃；±2.5%RH |
| Temp&Hum Departure | ±0.5℃-±2℃；±3%RH(>75%RH); ±5%RH(≤75%RH) |
| Controller Resolution | ±0.3℃；±2.5%RH |
| Controller Brand | LCD touch screen controller |
| Material | In side wall | SUS 304# stainless steel plate |
| Housing | Steel plate surface fog processed or color painted |
| Heat Insulator | resistance to high temperature, high chlorine acid b vinegar foam
insulation materials |
| Air Circulation Way | centrifugal fan-broadband type force air circulation |
| Refrigeration Way | cascade type multiple refrigeration |
| Refrigerator | fully enclosed piston compressor Tecumseh France |
| Refrigerants | R4O4Aor American Dupont environmental protection cold
media(R23+R404) |
| Condensing Way | Air-cooling |
| Heater | nickel chrome heating wire heater |
| Humidifier | semi-closed steam |
| Water Supply Way | automatic cycle water supply |
| Standard Accessories | *50mm test hole on the
left............................................................1PCS
*PL inner
lamp................................................................................1PCS
*Adjustable
clapboard.....................................................................2PCS
*Humidity
cloth...............................................................................1Bag
*Fuses..............................................................................................3PCS
*Power
line.......................................................................................1PCS
*Software
CD....................................................................................1PCS
*Operation
manual.............................................................................1PCS |
| Safety Devices | *Leakage current
*Overload
*Compressor overload
*Over temperature
*Ultra-wet/dry
*Humidification temperature protection. |
| Power | Single phase 220V AC±10% 50/60HZ
|
Features:
1.Walk-in Climatic Chamber With Temperature Humidity Climatic
Testing Systems On Site Installation is composed of the chamber,
refrigeration systems, heating systems, air circulation system and
control system.
2.Battery Explosion-proof High Low Temperature Test Chamber is made
of high quality SUS#304 stainless steel material,the outer shell
adopts A3 steel plate,surface electrostatic spraying.
3.Insulation system uses superfine fiberglass wool or polyurethane
foam so as to ensure the temperature of inside chamber.
4.Temperature and humidity control adopts programmable touch screen
temperature and humidity controller, with automatic calculation of
PID function.
5.Adopts steam humidifying method, automatic water circulation
loop,with functions of automatic filling water.
6.Refrigeration system adopts original France "Taikang"
refrigeration unit and full sets of refrigeration parts.
7.Input mode PT100 sensor.
8.The system of heating up, heating down, dehumidifying, and
humidifying can be operated independently so as to reduce the cost
of testing, extend the operating life of the machine and decrease
the failure rate.
9.Powerful multi-wing type air circulation which can ensure even
temperature distribution inside the working chamber.
10.With larger transparent viewing window and lighting inside to
observe the test.
11.Door seal adopts silicone rubber material which can avoid aging
and hardening in high and low temperature conditions.
12.Standard configuration with one test hole on the left side of
the chamber for easy testing operation and temperature measurement.
13.With various of safety protection device such as leakage and
outage protection,compressor overpressure protection,overload
fusing protection,audio signal alarm.
What you will get:• LED Touch Screen
• PID Control of Temperature and Humidity
• Both Temperature and Humidity are Programmable (can have
100pattern, each pattern has 999 segment)
• With Humidity Sensor
• With RS485/232 output to computer
• Window Software
• Remote fault notification(opntional)
• With Viewing Window
• With thermostats (prevent overheat)
• Cable Ports(50mm diameter)
• With Data Storage fuction by USB Flash Memory
• Protection (phase protection, overheat, overcurrent etc)
• Water Tank with level detector
• Adjustable Shelf
• Anti-condensation technology of the workroom .(Optional)
• User friendly three color LED indicator lamp ,easy to read
working condition
FAQ:
1. Are your a trading company or a factory?
Re: We are factory with 15 years manufacturing experience and
export to more than 100 countries all over the world in past 9
years or exporting..
2. After an order is placed, when to deliver?
Re: Generally about 20-30 working days, standared products most of
time we can arrange shipment within 3 working days.
3. What about the warranty with after - sales services?
Re: 12 months free warranty.
After the warranty, the professional after-sale service team will
provide perfect technical support,and help customer solve problems
encountered while using our product, handles guest problems and
complaints in a professional and timely.
4. What about the services and product' quality?
Re:Service: OEM service,Design service,Buyer lable service.Quality:
Each instruments must be carried out 100% quality examination and
test, the finished products must through a third party calibration
institutions before shipping and delivery goods.
5. How to install and training?
Re: If the products is easy to install and training, customers can
learn the operation and maintenance manual to installation and use.
If the products is hard to use, customers can come LIYI factory to
learn how to installation and use.
Customer can also choose to require our engineer to go for onsite
installation if needed.
