LIYI Water Cooled Thermal Shock Chambers 300L -65℃ To +180 ℃
Thermal Testing Equipment
Machine introduction:
300L Water Cooled -65℃ To +180 ℃ Thermal Shock Chambers Transfer
Time Less Than 10 Seconds is to use low-temperature and high
temperature cold storage hot storage tank, according to the action
need to turn on the DAMPER to achieve the fast impact effect. The
balance temperature regulation control system (BTC) controls the
SSPR in P.I.D. mode, so that the heating capacity of the system is
equal to the amount of heat loss, so it can be used in a long-term
and stable way.
300L Water Cooled -65℃ To +180 ℃ Thermal Shock Chambers Transfer
Time Less Than 10 Seconds meets today's environmental stress
screening requirements and is proven in installations around the
world. It's an economical way to achieve ESS or thermal shocks for
rapid component temperature changes.
The thermal shock chamber of this type is provided with three
dampers, i.e., one for opening or closing the gas outlet and intake
of the high-temperature air conditioning unit, another for the air
outlet and inlet of the outside air supplying unit, and another for
the gas outlet and intake of the low-temperature air conditioning
unit.
Standards:
● GB-2423．1-89(IEC68-2-1)Test Mode A:Low Temperature Test
● GB-2423．2-89(IEC68-2-2)Test Mode B:High Temperature Test
● GJB360．8-87(MIL-STD．202F)High Temperature Life Test
● GBJl50．3(MIL-STD-810D)High Temperature Test
● GJBl50．4(MIL-STD-810D)Low Temperature Test
Specifications:(all can customize)
| Model | LY-TS-42 | LY-TS-80 | LY-TS-150 | LY-TS-225 |
| Test chamber volumn(L) | 42 | 80 | 150 | 225 |
| Test method | Pneumatic throttle switching 2 chambers or 3 chambers |
| Index | High Temperature chamber | Pre-heating temperature range | ＋60～＋200℃ |
| Heating speed ※1 | ＋60→＋200℃≤20min |
| Low temperature chamber | Pre-cooling temperature range | －60－0℃ |
| Cooling speed ※1 | ＋20→－75℃≤80min |
| Test chamber | Temperature deviation | ±2℃ |
| Thermal shock temperature range | -40→＋150℃ (or customize) |
| Temperature recovery time※2 | Less than 5min |
| Sample shelf max load | 30kg |
| Allowed sample weight | 7.5kg | 7.5kg | 10kg | 10kg |
| Test chamber inner size(mm) | W | 400 | 400 | 500 | 500 |
| H | 350 | 500 | 600 | 700 |
| D | 300 | 400 | 500 | 600 |
| Overall size(mm) | W | 1360 | 1460 | 1560 | 1880 |
| H | 1800 | 1840 | 1940 | 2040 |
| D | 1400 | 1500 | 1600 | 1900 |
| ※1. Heating and cooling speed are both empty chamber working
condition. |
| ※2. Recovery condition:Room temperature ＋25℃ and cycling water
temperature ＋25℃,Test samples evenly distributed |
Since the cold chamber need huge cooling capacity for shocking, the
chamber’s cooling mode is often designed as air-cooled or
water-cooled.
Air-cooled type need installation environment:
The room must be equipped with exhauster and air conditioner to
make sure heat dissipation timely.
It’s applied to small power products and cool areas.
Water-cooled type need installation conditions:
The customer must prepare water pipe and water tower (located
outside) accordingly.
The water must be pure, or it will block the pipes and result in
some maintenance trouble with time going.
It’s often applied to large system with the features of better heat
dissipation, longer service time, low noise but slightly higher
price if count the fee of water tower and water pipes.
Our service:
During the whole business process, we offer Consultative Selling
service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photoes to show the proucts
appearance. Then, confirm the final solution and confirm final
price with customer.
3)Order process:
We offer below business term:
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
5)Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.
